Product Details:
Payment & Shipping Terms:
|
PH Value: | NSS ACSS:6.5~7.2; CASS:3.0~3.2 | Air Pressure: | 1.00±0.01kgf/cm2 |
---|---|---|---|
Solution Consistence: | NaCi 5% | Drying Test: | Chamber Temperature: 40℃-70℃( ±0.5℃) |
Heater: | Corrosion-resistant Titanium Tube | Controller: | LCD Touch Screen Temperature And Humidity Controller |
Control System:
※ High precision P.I.D. temperature controller to limit the temperature differences
※ Optional continuously or cyclic spray, apply fully automatic detecting system
※ Double over-heating protection systems protect both of chamber and operator.
※ Optional RS232 interface used to connect with computer
Specifications:
Model |
QCC-270 |
QCC-510 |
QCC-816 |
QCC-1200 |
||
Interior |
W |
900 |
1200 |
1600 |
2000 |
|
D |
600 |
850 |
850 |
1000 |
||
H |
500 |
500 |
600 |
600 |
||
Exterior Dimensions |
W |
1460 |
2200 |
2600 |
3000 |
|
D |
910 |
1200 |
1450 |
1650 |
||
H |
1280 |
1450 |
1550 |
1600 |
||
Solution Tank |
25L |
60L |
||||
Power Supply |
AC 220V /50HZ/1P |
AC380V/50HZ/3P |
||||
Ambient Temp. & Humid. Range |
+5℃~ +35℃ / <85%RH |
|||||
Air Pressure |
86~ 106Kpa |
|||||
Testing Temperature |
NSS ACSS 35℃±1℃ / CASS 50℃±1℃ |
|||||
Pressure Barrel Temperature |
NSS ACSS) 47℃±1℃ /CASS 63℃±1℃ |
|||||
Drying Test |
Chamber temperature: 40℃-70℃( ±0.5℃), Humidity: 30%-98% (±5%RH) |
|||||
Temperature and Humidity Test |
Chamber temperature range: RT℃-70℃(±2℃) (Low temperature: below 25℃ without humidity) |
|||||
Cooling time: -70℃~RT℃ within 35min |
||||||
Temperature uniformity: ±2℃ |
||||||
Temp. & Humid. Test |
Temperature test:45℃±2℃ |
Humidity test:85%~98% ±2%RH |
||||
Solution Consistence |
NaCi 5% |
|||||
PH Value |
NSS ACSS:6.5~7.2; CASS:3.0~3.2 |
|||||
Air pressure |
1.00±0.01kgf/cm2 |
|||||
Temperature fluctuation |
≦±0.5℃ |
|||||
Temperature uniformity |
≦2. 0℃ |
|||||
Temp. & Humid. Resolution |
0.1℃; 0.1%R.H. |
|||||
Spray quantum |
1.0~2.0ml/80cm2/h |
|||||
Material |
Polyvinyl chloride (P.V.C) |
|||||
Heater |
Corrosion-resistant titanium tube |
|||||
Temperature sensor |
Platinum Resistance PT-100 |
|||||
Controller |
LCD touch screen temperature and humidity controller |
|||||
Safety device |
Over-temperature protection , leakage protection |
Features:
※ Powerful LCD touch screen temperature and humidity controller
※ Optional recorder used to save temperature and humidity curve graph
※ Programmable control system, continuously and cyclic spray
※ Support power off memory, available to continue testing after power recover
※ Auto/manual water refilling system make sure non-stopping testing
※ Precision glass nozzle makes sure fog diffuses well-distributed
※ Auto descending and ascending system for testing cover, makes operation easy and safe
※ Clearly observe testing samples with auto defrost system
Salt Spray Test Chamber Conform But Not Limited Following Testing Standards:
※ ASTM B117 Standard Practice for Operating Salt Spray Apparatus
※ ASTM B368-97 Standard Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
※ ASTM B380-97(2007) Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
※ ASTM D1735-99 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
※ ASTM G85 - 11 Standard Practice for Modified Salt Spray (Fog) Testing
※ SGM-GM4465P Water Fog Humidity Test
※ ISO7253:2001 Paints and varnishes – Determination of resistance to neutral salt spray (fog)
※ ISO9227-2012 Corrosion tests in artificial atmospheres – salt spray tests
※ DIN 50021: Salt spray testing
※ JIS Z2371 Methods of Salt Spray Testing
Contact Person: Mr. Marshall Zheng
Tel: 86-769-23184144
Fax: 86-769-22854144